Publikationen
Alle Publikationen durchsuchen
Properties of Styrene–Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends: Effect of Maleic Anhydride Concentration and Copolymer Content Artikel In: Materials, Bd. 13, Nr. 5, S. 1237, 2020. DOI: 10.3390/ma13051237 |
Thermoplastic polyurethane foams: From autoclave batch foaming to bead foam extrusion Artikel In: Journal of Cellular Plastics, S. 0021955X2091220, 2020. |
Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA) Artikel In: Materials, Bd. 13, Nr. 6, S. 1371, 2020. DOI: 10.3390/ma13061371 |
Comparison of the Foamability of Linear and Long-Chain Branched Polypropylene—The Legend of Strain-Hardening as a Requirement for Good Foamability Artikel In: Polymers, Bd. 12, Nr. 3, S. 725, 2020. |
Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis Artikel In: Experiments in Fluids, Bd. 61, Nr. 2, 2020. |
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-Footprint Composite Alternative Artikel In: ACS Applied Polymer Materials, Bd. 3, Nr. 1, S. 426–435, 2020. |
Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends: Correlation with Morphology, Creep Behavior, Crystallinity, and Dynamic Mechanical Properties Artikel In: Macromolecular Materials and Engineering, S. 2000576, 2020. |
Rheological rationalization of in situ nanofibrillar structure development: Tailoring of nanohybrid shish-kebab superstructures of poly (lactic acid) crystalline phase Artikel In: Polymer, Bd. 211, S. 123040, 2020. |
Flame-retardant hybrid materials based on expandable polystyrene beads Artikel In: Journal of Fire Sciences, Bd. 38, Nr. 3, S. 270–283, 2020. |
Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder Artikel In: Polymers, Bd. 11, Nr. 12, S. 2070, 2019. |
Assessment of compatibilization role of nanoclay in immiscible polystyrene/ethylene–octene copolymer blends via wide-angle X-ray scattering, microstructure, rheological analyses, and mechanical properties Artikel In: Journal of Applied Polymer Science, Bd. 137, Nr. 22, S. 48748, 2019. DOI: 10.1002/app.48748 |
Influence of nucleating agent type on the morphology of extruded polyetherimide foam for printed circuit boardsast Artikel In: Journal of Cellular Plastics, S. 0021955X1986410, 2019. |
Thermal, fire, and mechanical properties of solvent-free processed BN/boehmite-filled prepregs Artikel In: Polymer Engineering & Science, 2019. DOI: 10.1002/pen.25184 |
Viscoelastic epoxy foams by an aqueous emulsion foaming process Artikel In: Journal of Cellular Plastics, Bd. 56, Nr. 1, S. 105–118, 2019. |
Evaluation of DOPO and Nano-Silica Modified Epoxy Resin Systems as Low Viscous, Flame Retardant Additives for Infusion and Injection Processing of Carbon Fiber Reinforced Plastics Artikel In: Key Engineering Materials, Bd. 809, S. 3–8, 2019. |
Evaluation of DOPO and Nano-Silica Modified Epoxy Resin Systems as Low Viscous, Flame Retardant Additives for Infusion and Injection Processing of Carbon Fiber Reinforced Plastics Konferenzbeitrag In: Key Engineering Materials, S. 3–8, Trans Tech Publications, Ltd., 2019. |
Tailor Made Hybrid Laminates Based on UD-Tapes - A Way to Efficient Thermoplastic Components Konferenzbeitrag In: Key Engineering Materials, S. 41–46, Trans Tech Publications, Ltd., 2019. |
Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO2 Modified Epoxy Novolac Resin and Evaluation of Its Combinational Effects Artikel In: Materials, Bd. 12, Nr. 9, S. 1528, 2019. DOI: 10.3390/ma12091528 |
Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinforced Composites Artikel In: Polymers, Bd. 11, Nr. 5, S. 823, 2019. |
Transverse Thermal Conductivity of Epoxy Carbon Fiber Prepreg Laminates with a Graphite Filled Matrix Artikel In: Journal of Composites Science, Bd. 3, Nr. 2, S. 44, 2019. DOI: 10.3390/jcs3020044 |
Effect of Resin and Blocked/Unblocked Hardener Mixture on the Production of Epoxy Foams with CO2 Blocked Hardener in Batch Foaming Process Artikel In: Polymers, Bd. 11, Nr. 5, S. 793, 2019. |
Dielectric analysis monitoring of thermoset curing with ionic liquids: From modeling to the prediction in the resin transfer molding process Artikel In: Polymer Composites, 2019. DOI: 10.1002/pc.25306 |
Effect of Curing Agent on the Compressive Behavior at Elevated Test Temperature of Carbon Fiber-Reinforced Epoxy Composites Artikel In: Polymers, Bd. 11, Nr. 6, S. 943, 2019. |
Effects of chemical modifications on the rheological and the expansion behavior of polylactide (PLA) in foam extrusion Artikel In: e-Polymers, Bd. 19, Nr. 1, S. 297–304, 2019. |
Influence of mid-stress on the dynamic fatigue of a light weight EPS bead foam Artikel In: e-Polymers, Bd. 19, Nr. 1, S. 349–354, 2019. |
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent Artikel In: Journal of Applied Polymer Science, Bd. 137, Nr. 1, S. 47876, 2019. DOI: 10.1002/app.47876 |
The Effect of Dispersion and Particle–Matrix Interactions on the Fatigue Behavior of Novel Epoxy/Halloysite Nanocomposites Buchkapitel In: Processing of Polymer Nanocomposites, S. 121–155, Hanser Fachbuchverlag, 2019, ISBN: 978-1-56990-635-4. DOI: 10.3139/9781569906361.004 https://www.ebook.de/de/product/35048115/samuel_kenig_processing_of_polymer_nanocomposites.html |
Thermal expansion of clay polymer nanocomposites as a function of aspect ratio and filler content Artikel In: Polymer, Bd. 169, S. 74–79, 2019. |
Morphology control of extruded polystyrene foams with benzene-trisamide-based nucleating agents Artikel In: Journal of Cellular Plastics, Bd. 55, Nr. 3, S. 249–261, 2019. |
Influence of Fiber Volume Content on Thermal Conductivity in Transverse and Fiber Direction of Carbon Fiber-Reinforced Epoxy Laminates Artikel In: Materials, Bd. 12, Nr. 7, S. 1084, 2019. DOI: 10.3390/ma12071084 |
The Effect of Dispersion and Particle–Matrix Interactions on the Fatigue Behavior of Novel Epoxy/Halloysite Nanocomposites Buch Carl Hanser Verlag GmbH & Co. KG, 2019. |
Foams Buchkapitel In: Karger-Kocsis, József; Tamas, Barany (Hrsg.): Polypropylene Handbook: Morphology, Blends and Composites, S. 579–641, Springer-Verlag GmbH, 2019, ISBN: 978-3-030-12903-3. DOI: 10.1007/978-3-030-12903-3_10 https://www.ebook.de/de/product/36020188/polypropylene_handbook.html |
Chemical Modification and Foam Processing of Polylactide (PLA) Artikel In: Polymers, Bd. 11, Nr. 2, S. 306, 2019. |
Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Trisamide-Based Additive Artikel In: Polymers, Bd. 11, Nr. 2, S. 268, 2019. |
Influence of low heat conductive inserts on morphology of foam injection molded parts Konferenzbeitrag In: Author(s), 2019. DOI: 10.1063/1.5088305 |
Influence of low heat conductive inserts on morphology of foam injection molded parts Konferenzbeitrag In: Proceedings of the Europe/Africa Conference, Author(s), 2019. DOI: 10.1063/1.5088305 |
Development of a bead foam based on the engineering polymer polybutylene terephthalate Konferenzbeitrag In: Author(s), 2019. DOI: 10.1063/1.5084836 |
Effect of filler type and particle size distribution on thermal properties of bimodal and hybrid – BN/Boehmite-filled EP-Novolac composites Konferenzbeitrag In: Author(s), 2019. DOI: 10.1063/1.5084826 |
Resin composition, prepreg material, composite component and method for producing the component and a resin composition Patent 2019, (WO 2019/034280 A1). |
Development of a bead foam based on the engineering polymer polybutylene terephthalate Konferenzbeitrag In: Proceedings of the Europe/Africa Conference, Author(s), 2019. DOI: 10.1063/1.5084836 |
Effect Of Filler Type And Particle Size Distribution On Thermal Properties Of Bimodal And Hybrid – BN/boehmite-filled EP-novolac Composites Konferenzbeitrag In: Proceedings of the Europe/Africa Conference, Author(s), 2019. DOI: 10.1063/1.5084826 |
Auswirkungen von interlaminaren Eigenspannungen auf die mechanischen Eigenschaften von thermoplastischen Hybridverbundwerkstoffen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2019. |
Hysteresismessungen an Partikelschäumen: Erstellung eines Modells zur Simulation der Mitteldehnung bei dynamischer Ermüdung Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2019. |
Influence of low heat conductive inserts on morphology of foam injection molded parts Konferenzbeitrag In: Proceedings of the Europe/Africa Conference, Author(s), 2019. DOI: 10.1063/1.5088305 |
Microcellular low-density nanocomposite foams nucleated by carbon-based nanofillers-processing, properties and foaming behavior Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2019. |
EPP-Schäume – mehr als nur heiße Luft Sonstige 2019. |
EPP-Schäume – mehr als nur heiße Luft; Artikel In: Industrieanzeiger, Nr. 141:27, 2019. |
Über den Einfluss der Halbzeugart auf die Herstellung und Qualität von Formteilen aus glasmattenverstärkten Thermoplasten (GMT) / Artikel In: 2019. |
Foams Buch Springer International Publishing, 2019. |
Development of a bead foam based on the engineering polymer polybutylene terephthalate Konferenzbeitrag In: Proceedings of the Europe/Africa Conference, Author(s), 2019. DOI: 10.1063/1.5084836 |